Cub Cadet 7000 Series User Manual
Page 90
Advertising
7264 Four Wheel Drive Axle Assembly Removal and Disassembly
6 - 116
7.48. Loosen all six hex cap screws securing the dif-
ferential housing to the ring gear using a 13mm
socket.
NOTE: Make certain the left axle assembly does
not fall out of the differential housing.
7.49. Secure the right axle shaft in the soft-jaws of a
vice. See Figure 7.49.
7.50. Remove the left axle from the differential hous-
ing. See Figure 7.50.
7.51. Remove both ball bearings and the spacer from
the left axle using an arbor press.
See Figure 7.51.
7.52. Inspect all components for wear or damage.
See Figure 7.52.
Figure 7.49
Left Axle Shaft
Vice with
Soft-Jaws
Figure 7.50
Left Axle
Differential
Figure 7.51
Ball Bearings
Spacer
Left Axle
Figure 7.52
Ball Bearings
Spacer
Left Axle
Advertising