7264 compact tractor – Cub Cadet 7000 Series User Manual
Page 49
6 - 55
7264 Compact Tractor
14.15. Remove the retaining ring securing the front
input shaft ball bearing in position using large
retaining ring pliers. See Figure 14.15.
14.16. Remove the e-clip securing the 28T auxiliary
drive pinion gear in position using a flat-blade
screwdriver. See Figure 14.16.
14.17. Slowly remove the 5” deep throat bar clamp.
Figure 14.15
5” Deep Throat Bar Clamp
Retaining Ring
Figure 14.16
28T Auxiliary Drive Pinion
E-Clip
Input Shaft
14.18. Remove the front input shaft bearing from the
transmission housing. See Figure 14.18.
14.19. Pull the input shaft assembly forward until it is
resting up against the external retaining ring.
See Figure 14.19.
NOTE: The input shaft assembly will not fall out
of the transmission.
Figure 14.18
Input Shaft
Bearing
Figure 14.19
Pull Input Shaft Assembly
Forward
6