Cub Cadet 7000 Series - Manual (Page 34)

7264 Compact Tractor
33. AUXILIARY HYDRAULIC PUMP SUCTION
TUBE AND STEERING PRESSURE HOSE:
33.1. Remove the auxiliary pump suction tube con-
nectors from the 90° fitting at the oil filter base,
and the straight fitting at the auxiliary hydraulic
pump using 7/8” wrenches. See Figure 33.1.
33.2. Remove the steering pressure hose connector
from the 90° fitting at the top of the auxiliary
hydraulic pump using two 3/4” wrenches. See
Figure 33.2.
33.3. Cap the exposed fittings.
34. HYDRAULIC OIL RETURN HOSE:
34.1. Remove the hydraulic oil return hose connector
from the 90° fitting at the top of the transmission
housing cover using 7/8” wrench and a 1”
wrench. See Figure 34.1.
34.2. Pull the hydraulic oil return hose towards the
front of the tractor until it is out of the work area.
34.3. Cap the exposed fittings.
35. FOUR WHEEL DRIVE SHAFT:
35.1. Loosen the set screw securing the four wheel
drive shaft to the four wheel traction drive shaft
using a 5/32” Allen wrench. See Figure 35.1.
35.2. Slide the four wheel drive shaft rearward, releas-
ing the front portion from the four wheel drive
input shaft.
Figure 33.1
Auxiliary Pump
Suction Tube
Connectors
90°
Auxiliary Pump
Figure 33.2
90° Fitting
Auxiliary Pump
Steering Pressure Hose
Figure 34.1
Hydraulic Oil Return Hose
Connector
90°
Figure 35.1
Set Screw
Four Wheel
Drive Shaft
Four Wheel Traction Drive Shaft
6 - 40