Flat fell seam, Baste stitching – SINGER 5160 User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S I N G E R
RECOMMENDED INITIAL SETTINGS
• Pattern: Straight Stitch
• Stitch width: Straight
• Stitch length: Longest (5)
• Foot: General Purpose
• Needle Thread Tension: Set at 1
Sewing Instructions:
After basting your seam, stitches can be removed easily by
pulling on your bobbin thread. Do not forget to re-set your
tension back to your normal setting after basting is
complete.
Baste Stitching
100
Flat Fell Seam
RECOMMENDED INITIAL SETTINGS
■ Pattern: Straight Stitch
• Stitch Width: Straight
• Stitch length: Z-3
■ Foot: Standard Zigzag or Zipper foot
Sewing Instructions:
Baste fabric wrong sides together at seamline. Stitch at 5/8
of an inch from the edge. Press the seam allowances to one
side of the seam, and trim away the lower seam allowance
to 1/8 of an inch.
Turn in top seam allowance 1/4 of an inch (to edge of
stitching) and press. Baste seam allowance to garment,
concealing the trimmed lower seam. Stitch along the edge
of the fold.