SINGER 5160 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S I N G E R
8. To pass the thread through the spiral thread guide,
start from the left, making a circular clockwise
movement with your hand twice. The thread will
slide inside the center of the spiral (illustration 7).
9. Pass the thread through the last thread guide and
turn hand wheel toward you until needle is in its
highest position. Lower press foot.
10. Lower needle threader lever slightly down and pass
the thread through the guide as shown in the
illustration 8. Continue lowering the lever until
hook passes inside the needle eye.
11. Insert thread in the hook slot and lead it slightly up
(illustration 9).
12. Loosen the lever slightly and the thread will pass
through the needle eye automaticaly.
13. The thread will produce a loop. Pull loop about 4”,
opening it with your fingers.
Note: We recommend to set machine for straight
stitch, the needle in the center and in its highest
position, and the presser foot lowered to make
this operation easier.
42