Rolled hem – SINGER 5160 User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S I N G E R
Rolled Hem
The Rolled Hem Foot aids in rolling the fabric’s edge.
This foot is designed to sew straight, so avoid curves
and sharp turns.
RECOMMENDED INITIAL SETTINGS
• Select a soft weight fabric.
• For approximately 1 inch of the fabric, press a 1/8
inch hem, then turn fabric again and press, making a
total of a 1/4 inch of fabric being turned up.
• Attach Rolled Hem Foot.
• Select a Straight Stitch, medium length.
• Stitch approximately 1/2 inch of the folded hem.
• Leave needle in fabric and lift presser foot.
■ Guide fabric into scroll of foot.
• Lower foot and continue to sew, holding the thread
tails firmly.
106