Quilting functions – SINGER 5160 User Manual
Page 98
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S t N G E R
Quilting functions
(Channel, Template, Motif and Stipple Quilting)
RECOMMEHf:>ED INITIAL SETTINGS
PatterniStraight Stitch
Needle Position; Center
Stitch width: Straight
Stitch Length: 2 - 3
Foot: For channel use General Purpose, for all others
remove foot and shank.
Attach: Feed Cover Plate forTemplate, Motif and Stipple
Quilting.
For channel quilting sew several rows of long parallel
lines. These lines can run vertically, horizontally or
diagonally. Stippling is free motion quilting where you
hoop the fabric and guide it by hand, allowing you to
stitch in any direction. For template quilting transfer a
design from a template (plastic stencil) to your fabric
and then stitch following the outline. Motif quilting is
used to emphasize the printed design of a fabric and is
accomplished by outlining the desired motif using the
darning and embroidery foot. All of the above techniques
are used to hold the layers of the quilt together.
96