BECKHOFF EP2xxx - Manual (Page 100)

Mounting and cabling
Inputs
Fig. 96: Digital inputs ZS2001, 8 channels
The picture shows connection of 8 sensors in single­wire and of respectively one sensor in two­ and three­
wire connection.
Please pay attention for connector ZS2001­0004: two bridges (24 V und 0 V) are necessary to feed the
terminal points for two­ and three­wire connection.
Outputs
Fig. 97: Digital outputs ZS2001, 8 channels
The picture shows connection of 8 actuators in single­wire and of respectively one actuator in two­ and
three­wire connection.
Please pay attention for connector ZS2001­0004: two bridges (24 V und 0 V) are necessary to feed the
terminal points for two­ and three­wire connection.
EP2xxx 100 Version 2.1.0