BECKHOFF EP2xxx - Manual (Page 13)

Product overview
2.3 EP2008­000x
2.3.1 EP2008 ­ Introduction
Fig. 4: EP2008
8 digital outputs 24 V
DC
, I
max
= 0.5A
The EP2008 EtherCAT Box with digital outputs connects binary control signals from the controller to the
actuators at the process level. The 8 outputs handle load currents of up to 0.5 A, and indicate their status
through light emitting diodes.
The signals are connected optionally via M8 connectors (EP2008­0001) or M12 connectors (EP2008­0002).
The outputs are short­circuit proof and protected against inverse connection.
Quick links
Installation
UL Requirements for UL approved modules
ATEX ‐ Special conditions [ } 92] for ATEX approved modules
EP2xxx 13 Version 2.1.0