BECKHOFF EP2xxx - Manual (Page 80)

Mounting and cabling
1 ) colored markings according to EN 61918 in the four­pin RJ45 connector ZS1090­0003
2 ) wire colors according to EN 61918
3 ) wire colors
Note
Assimilation of color coding for cable ZB9030, ZB9032 and ZK1090­3xxxx­
xxxx (with M8 connectors)
For unification the prevalent cables ZB9030, ZB9032 and ZK1090­3xxx­xxxx this means
the pre assembled cables with M8 connectors were changed to the colors of EN61918 (yel­
low, orange, white, blue).So different color coding exists. But the electrical properties are
absolutely identical.
EtherCAT connectors
The following connectors can be supplied for use in Beckhoff EtherCAT systems.
Designation Plug connector Comment
ZS1090­0003 RJ45 four­pin, IP20, for field assembly
ZS1090­0004 M12 four­pin, IP67, for field assembly
ZS1090­0005 RJ45 eight­pin, IP20, for field assembly,
suitable for Gigabit Ethernet
ZS1090­0006 M8 four­pin, IP67, for field assembly
ZS1090­0007 M8 socket four­pin, IP67, for field assembly, for ZB903x cable
ZS1090­1006 M8 plug four­pin, IP67, for field assembly up to OD = 6.5 mm
ZS1090­1007 M8 socket four­pin, IP67, for field assembly up to OD = 6.5 mm
3.2.2 EtherCAT ­ Fieldbus LEDs
Fig. 66: EtherCAT­LEDs
Table 5: LED displays
LED Display Meaning
IN L/A off no connection to the preceding EtherCAT module
Lit LINK: connection to the preceding EtherCAT module
flashing ACT: Communication with the preceding EtherCAT module
OUT L/A off no connection to the following EtherCAT module
Lit LINK: connection to the following EtherCAT module
flashing ACT: Communication with the following EtherCAT module
Run off Status of the EtherCAT module is Init
flashes quickly Status of the EtherCAT module is pre­operational
flashes slowly Status of the EtherCAT module is safe­operational
Lit Status of the EtherCAT module is operational
EP2xxx 80 Version 2.1.0