BECKHOFF EP2xxx - Manual (Page 34)

Product overview
Definitions for the behavior of the outputs in the presence of a short­circuit
F800:0 ­ DO Settings (Safe State Value)
Fig. 22: EP2316­0008 ­ F800:0 ­ DO Settings (Safe State Value)
Table 1: F800:01 ­ Disable shut off (default: FALSE)
Value Meaning
FALSE If a short­circuit occurs at one output, all outputs of
the module will be switched off.
This disabling can be removed through the process
data value Reset Outputs.
TRUE If a short­circuit occurs at one output, only this output
of the module will be switched off.
After the short circuit has been eliminated, this output
is automatically enabled again. see "Extracted nested
table 3"
F800:11 ­ Switch off time (default: 0x03E8, 1000
dec
)
Enter here the time in milliseconds after which (if F800:01 Disable shut off = FALSE) the module checks, by
switching itself on again, whether the short­circuit has been rectified.
Default = 1000 ms
EP2xxx 34 Version 2.1.0