BECKHOFF EP2xxx - Manual (Page 71)

Product overview
Fig. 55: EP2817­0008, DIG Outputs Channel n
Die assignment is done in pairs each on the right and left side of the D­SUB connector, to connect double
switching valves systematically:
DIG Outputs Device
Under DIG Outputs Device you find the control outputs of the module.
Fig. 56: EP2817­0008, DIG Outputs Device
Set safe state
Sets the module into the safe state.
Reset outputs
Sets the module's error bits „Error channel X“ back. The outputs are activated again.
2.14.5 Configuration
A number of parameterizations can be carried out for the EP2316­0003, EP2316­0008, 2816­0008 and
2816­0010 modules on the C0E ­ Online tab in the TwinCAT System Manager.
EP2xxx 71 Version 2.1.0