Beisler 100-68 - Manual (Page 119)

6.6.2.1 Testing the corner knife unit
With this program the step motors and cylinders can be checked.
Machine parameters corner knives
Corner knife distance is displayed or checked.
After opening the menu the step motors for
the corner knives can be tested.
Test correction of corner knives at the seam beginning
(in case of slanted pockets only)
Test correction of corner knives at the seam end
(in case of slanted pockets only)
Reference run corner knife supports
Check corner knives (cylinder)
– Make reference run.
– Tap the desired parameter.
The program is started.
– Tap the function key “ESC” to quit the menu.
35
4