Beisler 100-68 - Manual (Page 74)

– Loosen the screws 3 slightly.
– Shift the holder 2 correspondingly.
– Tighten the screws 3.
– Swivel the corner knife station back again.
Correction of the corner incision at the seam beginning
–
Loosen the screw 5 slightly.
– Adjust the corner knife station with the hexagon screw 4.
ATTENTION !
Observe the position of the eccentric.
Setting range
– Tighten the screw 5.
– Make a test seam.
– Check seam and cutting pattern.
36
3 2 5 4