Beisler 100-68 - Manual (Page 94)

Seam functions
The symbols in the middle of the right display half enable a quick
access to important parameters.
The operator can combine up to 18 parameters to be displayed in the
main screen (see also chapter __).
Example:
Centre knife switched on
Corner knives switched on
Stacker or ejector roller
Vacuum (automatic)
Tape feed (automatic)
Holding stamp
Activate/ deactivate left flap clamp
Activate/ deactive right flap clamp
Activate/ deactivate light barriers
Feeding position
Zipper scissors and zipper unwinder
The functions and adjustments of the individual seam functions are
described more exactly in the chapters 5.4 (”Seam parameters”).
Seam functions
Activate/ deactivate laser lamps
Threading key for needle thread (thread clamp)
Manual tape feed
Reset the daily piece counter
10