Beisler 100-68 - Manual (Page 16)

2.7 Slanted pocket opening (optional)
The 100/68 is optionally equipped with an automatic corner knife
station guaranteeing a precise incision of the corners of slanted
pockets.
For this purpose the machine head is equipped with disengageable
needle bars.
Corner knife station
The adjustment of the corner knives as to the pocket length is
programmable and is realized by a step motor.
The slanted pocket corners result from the offset of the two seam rows
programmable in steps of 1 mm.
The programmable pocket corner incision - adjustable via two step
motors - is freely selectable for the seam beginning and the seam end
and amounts to max. +/- 10 mm in relation to the second seam.
The lateral distance of the corner knives to the seam is manually
adjustable.
The whole unit can be folded out for adjusting and servicing.
2.7.1 Swivelling the corner knife station in and out
The corner knife station 1 can be swivelled out completely.
Caution: Risk of injury!
Switch the main switch off.
Swivel the corner knife station out only with the sewing unit
switched off.
Swivelling the corner knife station out
–
Push the rear corner knife support 3 (seam beginning) to the left.
– Pull catch 2 down.
– Swivel the corner knife station 1 to the left.
The knives are accessible for adjusting and servicing.
14
1 3 2 1