Beisler 100-68 User Manual
Page 14
2.5
Winding up the hook thread
The separate winder allows to wind up up the hook threads
independent of the sewing process.
–
Remove thread remainders from the bobbin hubs before winding
up.
–
Put the thread reel on the thread reel holder.
–
Thread the thread through the drill-hole 1 of the unwinding arm.
–
Guide the thread through the guide 3.
–
Guide the thread through the bobbin thread tension 1.
–
Prewind the thread in the central supply groove of the bobbin hub
in clockwise direction.
The full supply groove guarantees a secure winding start, even in
case of monofilament threads.
With the thread supply in the supply groove it is ensured that the
pocket opening can be safely finished after the remaining thread
monitor has produced the message “bobbin empty”.
The reflecting surface 4 of the bobbin hub has to be kept clean.
–
Press the bobbin retainer 2 against the bobbin hub.
The winder starts.
After reaching the set bobbin filling quantity the winder stops
automatically.
See the service instructions for setting the bobbin filling quantity.
12
3
2
1
4