Beisler 100-68 - Manual (Page 123)

Testing the corner knife motion
Caution: Risk of injury!
Do not reach into the area of the corner knives.
The corner knives shooting up can cause severe cuts.
Check the corner knives with utmost caution when the sewing unit is
running.
The corner knives are tested in a sequence.
•
Step 1 = front corner knives move upwards and remain in top posi-
tion
•
Step 2 = hind corner knives move upwards and remain in top positi-
on
•
Step 3 = only the left front corner knife moves upwards and re-
mains in top position
•
Step 4 = right front corner knife moves upwards and remains in top
position
•
Step 5 = left hind corner knife moves upwards and remains in top
position
•
Step 6 = right hind corner knife moves upwards and remains in top
position
•
Step 7 = complete cutting operation with all four knives
– Tap the symbol.
The test sequence starts.
– Tap the Symbol once again.
The next step is carried out.
– Press the symbol until all steps have been carried out.
– Press the symbol to return to the previous step.
– Tap the function key ESC to quit the test program.
39
4