Beisler 100-68 - Manual (Page 41)

1. General notes
The service instruction manual on hand describes the adjustment of
the sewing unit 100/68 in an appropriate sequence.
ATTENTION !
Some of the setting positions are interdependent.
Therefore it is absolutely necessary to do the adjustment following the
described order.
The operations described in the service instructions must only be
executed
by qualified staff and correspondingly instructed persons respectively!
Risk of breakage !
Before the sewing unit is put into operation again after having been
disassembled the necessary adjustments have to be carried out
according to the service instructions.
Before any adjusting operations of parts involved in the stitch
formation are made:
–
Insert a new needle without any damage.
Caution: Risk of injury !
Before repair, converting and maintenance work is done:
–
Switch the main switch off and disconnect the sewing unit from the
pneumatic
supply system.
Exception: Adjusting operations carried out with the help of test or
setting programs.
Adjusting operations and function tests when the sewing unit is
running
–
Carry out adjusting operations and function tests of the running
sewing unit
only under observation of all safety measures and with
utmost caution.
Adjusting operations in the needle zone
–
Parts which can lead to injuries have to be removed before
carrying out the adjusting operations.
Exception:
The parts are absolutely necessary for the adjusting operations.
3
3