Beisler 100-68 - Manual (Page 128)

6.6.2.6 Testing feeding operation, material feed and sewing cycle
With this program the feeding operation is tested.
Two different test modes are available:
Test mode 1 The whole feeding operation and sewing cycle
is carried out.
Test mode 2 Only the feeding operation and the
clamp feed are started and stopped with the foot
switch.
– Tap the icon.
– Enter the mode.
– Tap the icon “ON”.
The test program is started.
– Tap the icon “ESC” until the main screen appears.
– Start the feeding test with the central pedal.
The test can be repeated as often as required.
– Switch the main switch of the sewing unit off and on again.
The test mode is deleted.
44