Beisler 100-68 User Manual

Page 91

Advertising
background image

3.2

Switching the seam functions on/ off

The parameter values are altered in the individual parameter screens.

–

Tap the desired parameter.
The symbol of the selected parameter is framed in blue.

–

Tap the OK key.
The function is switched on/off or a window with the prompt or the
current values appears.

–

Alter the parameters as described under 1. to 4.

–

Tap the OK key once again.
The new setting of the parameter value is taken over.

When altering the parameter values it is necessary to distinguish
between four parameter groups:

1. Functions which are switched on or off
–

Tap the function of the parameter to switch it on or off.

(on)

(off)

2. Parameters with various functions
–

Set the desired function of the parameter by tapping the cursor
keys “

ð ” or “ï”.

3. Parameters the values of which are altered in steps
–

Select the previous or next step of the parameter value by tapping
the cursor keys “

ñ ” or “ò”.

4. Parameters the values of which are entered via the numeric
keypad
–

Enter the desired parameter value via the numeric keypad.
ATTENTION !
The value must be within the given limits.
If the value entered is too large or too small, the upper or lower
limit is displayed after pressing the enter key.

4

7

Advertising