Beisler 100-68 - Manual (Page 43)

Raising the machine head
–
Swivel the folding station 1 aside by 90°.
– Swivel the fabric sliding sheet 2 to the left.
– Unscrew the fastening screw 6.
– Loosen the screw at the locking lever 4 and raise the holder.
– Tighten the screw.
– Lift the machine head in the area of the head cover 3 and raise it
cautiously.
– Lower the machine head a little again until catch 5 snaps in.
The area underneath the sewing machine head is accessible for
cleaning and adjusting now.
Caution: Risk of injury!
Do not reach into the cutout of the table top when the machine head is
raised.
Swinging the machine head back
–
Hold the machine head tight.
– Lift the machine head cautiously until catch 5 releases.
– Lower the machine head cautiously into the cutout of the table top.
– Swivel the fabric sliding sheet back again and let it catch.
– Loosen the screw at the locking lever 4.
– Swivel the lever downwards.
– Tighten the fastening screw 6 again.
– Swivel the folding station back until it snaps in catch 5.
– Tighten the screw at the locking lever 4.
5
3
4 5 2 6