Beisler 100-68 - Manual (Page 55)

3.5.2 Position of the folding slide when retracted
Caution: Risk of injury!
Switch the main switch off.
Check and adjust the folding slide only with the sewing unit switched
off.
Standard and checking
When retracted the folding slide 2 must be located
0.5 mm behind the edge of main clamp 1.
–
Check the position of the folding slide.
Correction
–
Loosen counternut 3.
– Adjust the screw 4 in such a way that the folding slide 2 is located
0.5 mm behind the edge of main clamp 1.
– Tighten the screws 4.
3
17
4 3 2 1