Beisler 100-68 - Manual (Page 135)

6.6.4.2 Reading data from the USB stick
Machine parameters, program sequences and seam programs can
individually be transferred to the USB stick.
ATTENTION!
During the data transfer to the control the sewing unit must not be
switched off.
When transferring programs from one sewing unit to another only
transfer the program sequences and seam programs.
– Plug the USB stick in the plug-in position at the side of the control
unit when the main screen is displayed.
The following screen appears:
– Tap the data to be saved by the USB stick.
A checkmark appears in the checkboxes.
– Tap the “Return key.
The loading process starts.
A lamp flashes at the USB stick.
When the saving process is finished, the right screen appears.
– Unplug the USB stick.
51
4