Guralp Systems CMG-DCM build <10,000 - Manual (Page 108)

Acquisition Modules and Platinum Firmware Digitiser Configuration
divide this by either 2, 4 or 5. The available rates are shown in the table
below, along with a way to configure each, although there are sometimes very
many different ways to configure any given rate.
Desired
output rate
Intermediate
steps
4 400, 100, 20
5 400, 100, 20
8 400, 200, 40
10 400, 100, 50
16 400, 80
20 400, 100
25 400, 100
40 400, 200
50 400, 250
80 400
100 400
125 500
200 400
250 500
400 tap 1
500 tap 1
1000 tap 1
The triggering settings are normally hidden but can be revealed by clicking
the
or button. The following extra dialogues
are displayed:
MAN-EAM-0003 108 Issue E - February 2014