Guralp Systems CMG-DCM build <10,000 - Manual (Page 284)

Acquisition Modules and Platinum Firmware Appendices
16.5.12 Sensor Port
This is a standard 26-pin “mil-spec” plug,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-16-26P although the initial “02E” varies with
manufacturer.
Suitable mating connectors have part-numbers like
***-16-26S and are available from Amphenol, ITT
Cannon and other manufacturers.
Pin Function Pin Function
A Vertical velocity +ve P Calibration signal
B Vertical velocity –ve R Vertical calibration enable
C N/S velocity +ve S N/S calibration enable
D N/S velocity –ve T E/W calibration enable
E E/W velocity +ve U Centre
F E/W velocity –ve V Active-high – see section 14.3.2
on page 224
G Vertical mass position W Unlock
H not connected X Lock
J N/S mass position Y Logic signal ground
K Busy indicator LED Z not connected
L E/W mass position a not connected
M not connected b Power 0 V
N Signal ground c Power output +10 to +24VDC
Wiring details for the compatible socket,
***-16-26S, as seen from the cable end (i.e.
during assembly).
MAN-EAM-0003 284 Issue E - February 2014