Guralp Systems CMG-DCM build <10,000 - Manual (Page 233)

Acquisition Modules and Platinum Firmware Monitoring Operations
•
­­boot file
This option specifies an alternative source file for DM24 Mk3
bootstrap firmware. If not specified, the upgrade command will look
in /usr/share/firmware/CMG­DM24mk3/ for files with names of
the form dm24mk3­boot*.img and use the most recent version that it
finds. It uses a lexical sort to determine which is the most recent. The
argument file should be the path to a valid DM24 bootstrap
firmware image.
•
­­firm file
This option specifies an alternative source file for DM24 Mk3 system
firmware or for CD24 firmware. If not specified, the upgrade
command will identify the digitiser type and, for DM24s, look in
/usr/share/firmware/CMG­DM24mk3/ for files with names of the
form dm24mk3­[0­9]*.img and use the most recent version that it
finds. For CD24s, it will look for files with names of the form
dm32_xx_*.hex in /usr/share/firmware/CMG­CD24/ where
represents the hardware type (e.g. 4A, 8mR, etc) as determined by
interrogating the digitiser. In either case, the program uses a lexical
sort to determine which file contains the most recent firmware buid.
The argument file should be the path to a valid firmware image.
•
­­dsp file
This option specifies an alternative source file for DM24 Mk3 DSP
firmware. If not specified, the upgrade command will look in
/usr/share/firmware/CMG­DM24mk3/ for files with names of the
form dm24mk3­dsp*.img and use the most recent version that it
finds. It uses a lexical sort to determine which is the most recent.
The argument file should be the path to a valid DM24 DSP
firmware image.
•
­­auto­baud
Scan the digitiser output to attempt to determine the Baud rate and
adjust the configuration of the relevant serial port to match.
•
­­verbose
Show most of the digitiser dialogue while the command is running.
•
­­debug
This option turns on the production of some additional debugging
information.
The dm24­upgrade command is the fastest and simplest way to upgrade the
firmware on GSL-manufactured digitisers.
MAN-EAM-0003 233 Issue E - February 2014