Guralp Systems CMG-DCM build <10,000 User Manual
Page 168
Acquisition Modules and Platinum Firmware
Transmitting Data
•
Only blocks matching a list of channel names - offering the highest
granularity of control.
Max sample rate: If the output type is set to Only blocks below a certain
sample rate, the text field is used to specify the inclusive threshold, above
which data are not transmitted.
If the Output type field is set to Only blocks matching a list of channel
names, the channel names must be specified in the channel name table:
12.1.2.2 Configurable parameters in expert mode
The following additional configuration parameters in expert mode
Advanced
Log file: It may sometimes be desirable, for debugging purposes, to separate
log messages for this transmitter from the standard system log. The text field
can be populated with a path name which will then be used for dedicated
logging. If left blank, logging occurs (via the standard Linux syslog facility) to
/var/log/messages.
Log level: The drop-down menu controls the level of detail present in log
messages, whether to syslog or to a dedicated log file. Not all of the standard
syslog logging levels are available. The menu offers a choice (in order of
decreasing detail) of:
168
Issue E - February 2014