Guralp Systems CMG-DCM build <10,000 User Manual
Page 197
Acquisition Modules and Platinum Firmware
Transmitting Data
Enable: Causes this service to start automatically when the system is
re-booted. If this check-box is cleared, the service will need to be started
manually (from the “Control” → “Services” menu)
Delete: Causes the configuration for this instance to be removed from the
system when the form is submitted.
Network
Station name: Like SEED, QSCD links require a unique name to identify the
source of the data.
To send QSCD data to remote hosts, enter their DNS names or IP addresses in
the table, with the associated service name or port number for each. Port
names and numbers are associated with each other in the standard Linux
/etc/services file.
Clicking the
button on any row will open a new row. In the same way,
rows can be deleted by clicking the corresponding
button.
Channels
Instrument: The acquisition module scans all incoming data and prepares a
list, in the correct format, of the names of instruments which are sending
strong motion results. Enter one of these names in the field.
197
Issue E - February 2014