Guralp Systems CMG-DCM build <10,000 - Manual (Page 78)

Acquisition Modules and Platinum Firmware Networking Configuration
SSID: Specifies the Service Set Identifier (network name) for the desired
wireless network.
Priority: Used to decide which network is chosen for connection when
several configured networks are detected: connections to networks with
higher priority numbers are attempted first.
Key management: Drop-down menu used to select which authentication
strategy is used for this network. If WPA-PSK (WiFi Protected Access,
pre-shared keys) is chosen, the following fields allow the operator to specify
one or more access keys (passphrases).
7.2.1.3 IP address
The IP address screen allows the selection of DHCP (Dynamic Host
Configuration Protocol) or static addressing. If DHCP is chosen, a DHCP
server will provide the unit with an IP address as well as the IP address of a
default router (gateway) and, optionally, other parameters such as the address
of a DNS server (name-server).
If static addressing is selected, the desired IP address and default router must
be specified in the following two fields.
7.2.2 Configurable parameters in expert mode
When in expert mode new fields are available on the network and IP address
forms and there are two new tabs: IP aliasing and Routes.
MAN-EAM-0003 78 Issue E - February 2014