Guralp Systems CMG-DCM build <10,000 User Manual
Page 167
Acquisition Modules and Platinum Firmware
Transmitting Data
General
ACK/NAK timeout: Populated with an integer value which specifies the
number of milliseconds the server should wait for an acknowledgement
packet before transmitting the next block.
Mode: The drop-down menu controls the BRP transmission mode of the
server. At present, the only available choice is “Direct - simple transmission
with link error correction but no backfill”. Future implementations will offer
additional options.
Allow terminal: If checked, the server will allow remote clients access to the
source digitiser's command line for configuration purposes.
Filtering
Output type: The drop-down menu offers a choice of:
•
All blocks - filtering by block type is disabled
•
Only status blocks - no data blocks are transmitted
•
Only blocks below a certain sample rate - the threshold (inclusive) rate
is specified in the following text field.
167
Issue E - February 2014