Guralp Systems CMG-DCM build <10,000 - Manual (Page 230)

Acquisition Modules and Platinum Firmware Monitoring Operations
14.3.3 Upgrading digitiser firmware
The latest digitiser firmware for each type of digitiser is included in the
Platinum distribution so no Internet connection is necessary for the following
tasks. You may wish first to upgrade the Platinum firmware (see section 5 on
page 51), so as to be sure that you have the latest digitiser firmware available.
14.3.3.1 Upgrading via the web interface
To upgrade the firmware of a digitiser using the web interface select:
Configuration → Instruments → Port A instrument....
(or any other page under Configuration Instruments). The system will check →
the version of the firmware currently loaded. If a newer version is available,
an alert is displayed at the top of the page:
and a check-box is displayed at the bottom of the page:
To upgrade, tick the check-box and click .
MAN-EAM-0003 230 Issue E - February 2014