Guralp Systems CMG-DCM build <10,000 User Manual
Page 92
Acquisition Modules and Platinum Firmware
Networking Configuration
these changes. Go back to the configuration of the serial port and click on
PPP network configuration.
7.7.2 Configurable parameters
The configurable parameters for each port on the PPP connection screen have
three tabs: General, IP and Authentication.
7.7.2.1 General
Connection type has the following options:
•
Local serial link (active/client mode)
•
Local serial link (passive/server mode)
•
GPRS connection via Vodafone
•
GPRS connection via T-Mobile
The choices available from this menu reflect the chat scripts installed on your
system. If you wish to use a satellite modem or GPRS with an ISP other than
those listed, please contact Güralp Systems Ltd technical support.
Number of seconds to power down modem between calls: Set the desired
power-down time for the modem, if required. This can be useful with
modems that are prone to entering undefined states and ensures a clean reset
before each new connection.
92
Issue E - February 2014