MacroSystem Bogart SE Ver.2 User manual - Manual (Page 84)

82 Appendix
about the selected film in the left list . You can use the left/right
buttons to switch through all three available displays `all films´,
`all series´ and `episodes´ . In this menu you can also use the
`Navigation´ button to navigate the lists faster and the `yellow
star´ and `red heart´ buttons to organize the added items in the
right list .
The top part of the screen shows you the expected capacity
of the medium/destination in percent with a capacity bar . Note
that this capacity is only an approximate value (except for the
internal format) . The real capacity may vary depending on de-
tails in the footage, movement, noise factor in the images, etc .
It may be lower or higher and will only be definitive once the
film has been converted . It is therefore not a good idea to fill
up the medium to 99% and instead always keep a little reserve
capacity . When you are done adding films (and if the medium
capacity is not exceeded) , press the DVD button to start the
conversion/export process . A progress bar will show you the
time required . If you have chosen `Video DVD´ as the output
medium, you will be prompted to determine some additional
settings for the menu:
Video DVD menu creation
In the top part of the screen, you can first press `1´ to return to
the `Film selection´ menu if you wish to make changes . To edit
the CD/DVD menu, press `2´ . This then switches to the sug-
gested DVD menu: You will see the third chapter (first image)
of the film suggested as the background of the menu . Each
added film has its own stamp image (the second chapter po-
sition of each film) . The menu initially has the title `DVD Menu´ .
Press the help button to get an overview of all functions in this
screen:
• Open/close disc tray
• Change title/stamp text
To change the given title text of the DVD menu, press the `Text
aA´ button . The next screen then allows you to rename the text
by first deleting the previous text and then entering your own .
When done, press OK and close the screen with the `Return´
button .
• Reduce saturation
Press the chapter- button to reduce the saturation on the
background image . Press it multiple times to further reduce the
saturation .
• Increase saturation
Press the chapter +button to increase the saturation on the
background image . Press it multiple times to further increase
the saturation .
• Reduce contrast
Press the RW button to reduce the contrast on the background
image . Press it multiple times to further reduce the contrast .
films, including additional formats (title, actors, genre, series-
album, etc .) . Playback of this format is only possible on sy-
stems that use the RelaxVision or Casablanca Media Manager
software . The films can be imported back onto the hard-drive
without any conversion on a 1:1 basis .
• Export
offers plenty of options for exchanging data with other systems
or platforms . The extensive list of devices will help you to
choose the format supported by a particular device . Supported
are: mobile phones, PDAs, video player and even special for-
mat types for internet platforms .
Press the `List´ switch underneath the Export button to reveal a
list of more than 600 possible devices and select one . You can
use the scroll slider to move up and down the list and choose
a manufacturer . If you press right, you will see all the devices
made by that manufacturer . If you press left, the list will show
all of the devices, sorted according to manufacturer . When
done, start the export . The data will be stored on the medium .
In most cases, this includes a conversion process to archive
the best possible results .
Once you have selected an output medium and format, the list
will be shown . The left list shows all available films which you
can select and press OK to add to the right list (selected for
the medium) .
The information button gives you some important information