MacroSystem Bogart SE Ver.2 User manual - Manual (Page 87)

85 Bogart SE 2 user manual
As you probably wish to have the first chapter at the beginning
of the film, accept the first mark . To do this, simply press the
OK button so that the arrow turns green and moves on .
Now that you know how to cut the video, use that knowledge
and move along the complete film to find the next suitable
position for the next chapter position . Once you have found it,
confirm it with OK so that a new black mark appears .
You can use the chapter+ and chapter- buttons to `jump´ from
one mark to another and thus scroll faster along the film .
Having added as many chapters as you whish, press Return to
exit the screen . Next, you can burn the film to DVD, this time,
along with your new chapter marks . You can also use the red
heart button to remove a chapter mark . Press play to play a
few seconds of the film . Press the green clover button to con-
firm and split the chapters accordingly .
As the chapter points are used for the background pictures
in the DVD menu, you should take care to choose suitable
frames . The first chapter mark is always at the beginning of
the film . The second mark is the frame used little stamp of the
film and the third is the background picture of the DVD menu .
If you add two films, the second chapter mark in it represents
the film icon for this second film .
Copy DVD
Press button `3´ to enter the `Copy CD/DVD´ screen . Please
note that in order to make a private copy of a disc, you may
require the permission of the copyright holder . Insert the disc
you wish to duplicate and press `1´ (Copy CD/DVD) . The me-
dium you insert is loaded and the tray opens . Insert an empty
disc (a recorded DVD RW will be deleted) and the system will
burn the contents to the new disc . When the process is com-
pleted, the tray will open again and you can remove the disc .
If you want to burn another disc, you have to load the original
disc again first .
Galileo backup
This function is only available if you have purchased the add-
on product MacroSystem Galileo . More information about this
product can be found in the separate Galileo manual .
If you want to edit a recorded TV show for instance, you may
need to remove several minutes of commercials . You must first
move the key point from the current position across a specific
time segment in the film . Grab the point with OK and select a
minute-wise scrolling speed . Now press the direction but-
ton a few times to scroll along the film . Smaller skips can be
achieved with second or frame wise moves . Confirm the now
created segment to be deleted with OK .
Ok, you have now created a segment to be deleted at the start
of the film . You’ll notice that the grey/green segment has tur-
ned totally grey . Next, press the chapter button to jump to the
end of the film . Your aim is now to define the second segment
to be deleted at the film’s end . Grab the arrow again with OK
and move minute-wise to the left . More detailed steps can be
made with smaller second and frame moves . Confirm the de-
fined segment with OK and the green/grey area will turn grey .
Ok, you have now already defined both the start and end parts
to be deleted . Great! Only thing left to do is to remove the
commercial blocks in the film itself . Scroll at 10-minute steps
across the film back to the beginning until you spot a commer-
cial in the review screen above . Keep going until you see the
last picture of the commercial block . Now press OK to mark
the segment with green/grey .
The new segment is automatically 1 minute long so you must
probably extend it . Scroll to the right until the commercials end
and you can see the first frame of the film again . When you are
sure, press OK and the entire segment will turn grey . Now hunt
down more positions with commercial blocks .
Once you have defined all segments to be deleted, press the
green clover button to remove all previously found delete seg-
ments and thus gain back capacity on the hard-drive .
Chapter / Split
If you are unhappy with the automatic 5 minute chapter creati-
on, you can create your own chapter marks .
To do this, enter the Film Archives and press the Options but-
ton again . Select the edition option Chapter Split by pressing
button `2´ (simply 2 on the remote) . This menu is similar to the
film editing one, but it is even easier to work with . You can see
the first frame of the film, which has been automatically posi-
tioned as the beginning of the first chapter . In the time bar,
the film is displayed completely in green; a black narrow line
marks a chapter beginning . The arrow turns black as soon as a
chapter has been positioned and confirmed .