NavCom LAND-PAK Rev.N - Manual (Page 167)

Technical Reference Manual Rev. N
Blk = All; Blu = IOP w/Internal Radio ; Red = IOP & LBM ; Grn = Engine only
165
Ref Message Field Description
Data
Type
Byte
Count
..Wn1+
chnl #
0x001E FAILED_RESIDFAST, Failed residual edit in nav_fast
0x001F FAILED_RESID, Failed residual edit in resid_edit (slow nav)
0x0020 FAILED_NOSATP, Satellite position not available in nav_slow
0x0021 FAILED_BUSY, State machine is still processing a command
0x0022 FAILED_MFBIG, Message frame calculation out of range
0x0023 FAILED_L1INVALID, L1 Measurement invalid in MeasProc
0x0024 FAILED_L2INVALID, L2 Measurement invalid in MeasProc
0x0025 FAILED_MEASTIME, Wrong measurement time in MeasProc
0x0026 FAILED_DUPPRN, Duplicate PRN in MeasProc
0x0027 FAILED_LOWCN0, C/N0 too low
0x0028 FAILED_MFSET, MF not set
0x0029 FAILED_CALOCK, C/A channel not locked
0x002A FAILED_L1ML2, L1 minus L2 slip detected
0x002B FAILED_L1ML2DOPPLER, L1 doppler minus L2 doppler slip
detected
0x002C FAILED_NOTIME, Time not set in hwtime
0x002D FAILED_NOL1, L1 not marked valid (or cycle slip) in hwmeas
0x002E FAILED_USERMEAS, Meas not valid in MeasProc
CKSM Checksum U08 1
ETX 03 (hex) U08 1