NavCom LAND-PAK Rev.N - Manual (Page 82)

Technical Reference Manual Rev. N
Blk = All; Blu = IOP w/Internal Radio ; Red = IOP & LBM ; Grn = Engine only 80
HOP Pattern (0x08)
Record
Usage Command - Yes
Response - Yes Input: sets the internal radio operation;
Output: reports the current internal radio settings
Ref Message Field Description Data Type Units Range Scale Byte Count
STX 02 (hex) U08 1
PRA1 99 (hex) U08 1
PRA2 66 (hex) U08 1
ID 73 (hex) U08 1
Length 0x0008 U16 2
W1
Action Control
B1=1: Store in NVRAM
B2=1: Use ACK/NAK
B3=1: Use Default values
U08 1
W2 0x08 Sub ID U08 1
W3 Primary Hopping Pattern (0) U08 1
W4 Secondary Hopping Pattern (0) U08 1
CKSM Checksum U08 1
ETX 03 (hex) U08 1
HOP Interval (0x10)
Record
Usage Command - Yes
Response - Yes Input: sets the internal radio operation;
Output: reports the current internal radio settings
Ref Message Field Description Data Type Units Range Scale Byte Count
STX 02 (hex) U08 1
PRA1 99 (hex) U08 1
PRA2 66 (hex) U08 1
ID 73 (hex) U08 1
Length 0x0008 U16 2
W1
Action Control
B1=1: Store in NVRAM
B2=1: Use ACK/NAK
B3=1: Use Default values
U08 1
W2 0x10 Sub ID U08 1
W3 Hopping interval U08 ms
1—8
2 –12
3 –16
4 –20
5 –30
6 –45
7 –80
8 –120
9 –100
1
W4 Spare (0x00) U08 1
CKSM Checksum U08 1
ETX 03 (hex) U08 1
0x73 continued on next page