NavCom LAND-PAK Rev.N - Manual (Page 42)

Technical Reference Manual Rev. N
Blk = All; Blu = IOP w/Internal Radio ; Red = IOP & LBM ; Grn = Engine only 40
1. Complete message ID is $GPxxx where xxx=above ID, except in case of SET,
MDE, and NCTGST (see notes 3, 4, and 5 below).
2. GGA may be output at up to a 10 Hertz rate by selecting 0x4000 in versions
greater than 2.04.
Refer to the section, NMEA Output Messages , for details on SET, MDE, and
NCTGST.
3. SET is a NavCom proprietary NMEA message of the form: $PNCTSET.
4. MDE is a NavCom proprietary NMEA message of the form: $PNCTMDE.
5. NCTGST is a NavCom proprietary NMEA message of the form: $PNCTGST.