NavCom LAND-PAK Rev.N - Manual (Page 27)

Technical Reference Manual Rev. N
Blk = All; Blu = IOP w/Internal Radio ; Red = IOP & LBM ; Grn = Engine only
25
1. Configured for 8 bit word length and 1 stop bit.
2. For multiple command actions, the bits in W1 may be OR’ed.
3. Wn1 and Wn2 may be repeated to configure a second port.
4. During command echo, Wn1 and Wn2 will be repeated for the second port.
5. Due to hardware limitations, baud rates combinations of 1200/115200, 2400/57600, or
2400/115200 cannot be supported. Any attempt to select one of these combinations
will be rejected. To prevent this problem, set both ports to a supported combination of
baud rates in the same input sentence.
6. Engine is configured as DTE.
7. If ACK/NAK is selected, and the input sentence is accepted, the ACK will be put out at
the new settings.