NavCom LAND-PAK Rev.N - Manual (Page 63)

Technical Reference Manual Rev. N
Blk = All; Blu = IOP w/Internal Radio ; Red = IOP & LBM ; Grn = Engine only
61
0x4e - System Initialization - 5 bytes
Message 4E is designed to set the engine to the factory default condition when this message is
sent. The port this message is sent on will become the control port without changing the baud
rates.
Record
Usage Command - Yes
Response - No
Factory Use only
Ref Message Field Description Data Type Units Range Scale
Byte
Count
STX 02 (hex) U08 1
PRA1 99 (hex) U08 1
PRA2 66 (hex) U08 1
ID 4e (hex) U08 1
Length 0x0005 U16 2
W1 Reserved U08 1
CKSM Checksum U08 1
ETX 03 (hex) U08 1