Westermo MRI-128-F4G-PSE24 - Manual (Page 109)

105
Port Configuraion
PVLAN Port Type :
Normal: The Normal port is None PVLAN ports, it remains its original VLAN
setting.
Host: The Host type ports can be mapped to the Secondary VLAN.
Promiscuous: The promiscuous port can be associated to the Primary VLAN.
VLAN ID: After assigned the port type, the web UI display the available VLAN ID
the port can associate to.
For example:
1. VLAN Create: VLAN 2-5 are created in VLAN Configuration page.
2. Private VLAN Type: VLAN 2-5 has its Private VLAN Type configured in Private
VLAN Configuration page.
VLAN 2 is belonged to Primary VLAN.
VLAN 3-5 are belonged to secondary VLAN (Isolated or Community).
3. Private VLAN Association: Associate VLAN 3-5 to VLAN 2 in Private VLAN
Association first.
4. Private VLAN Port Configuraiton
VLAN 2 – Primary -> The member port of VLAN 2 is promiscuous port.
VLAN 3 – Isolated -> The Host port can be mapped to VLAN 3.
VLAN 4 – Community -> The Host port can be mapped to VLAN 3.
VLAN 5 – Community -> The Host port can be mapped to VLAN 3.
5. Result:
VLAN 2 -> VLAN 3, 4, 5; member ports can communicate with ports in secondary
VLAN.
VLAN 3 -> VLAN 2, member ports are isolated, but it can communicate with
member port of VLAN 2..
VLAN 4 -> VLAN 2, member ports within the community can communicate with
each other and communicate with member port of VLAN 2.
VLAN 5 -> VLAN 2, member ports within the community can communicate with
each other and communicate with member port of VLAN 2.