Westermo MRI-128-F4G-PSE24 - Manual (Page 89)

85
0x3AB68794D602FDF43B21C0B37AC3BCA8
------------------------------------------------
Apply the setting
and go to the
configuration mode
Switch(config-mst)# quit
apply all mst configuration changes
Switch(config)#
Apply the setting
and go to the global
mode
Switch(config-mst)# end
apply all mst configuration changes
Switch#
Abort the Setting
and go to the
configuration
mode.
Show Pending to
see the new
settings are not
applied.
Switch(config-mst)# abort
discard all mst configuration changes
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# show pending
Pending MST configuration
Name orenixnix] (->The nameis not applied after Abort
settings.)
Revision 65535
Instance Vlans Mapped
-------- --------------------------------------
0 1,4-4094
1 2
2 3
(-> The instance is not applied after Abort
settings --
Config HMAC-MD5 Digest:
0xB41829F9030A054FB74EF7A8587FF58D
------------------------------------------------
RSTP
The mode should be rst, the timings can be configured in global settings listed in
above.
Global Information
Active Information Switch# show spanning-tree active
Spanning-Tree : Enabled Protocol : MSTP
Root Address : 0012.77ee.eeee Priority : 32768
Root Path Cost : 0 Root Port : N/A
Root Times : max-age 20, hello-time 2, forward-delay
15
Bridge Address : 0012.77ee.eeee Priority : 32768
Bridge Times : max-age 20, hello-time 2, forward-delay 15
BPDU transmission-limit : 3
Port Role State Cost Prio.Nbr Type
Aggregated
------ ---------- ---------- -------- ---------- ------------ ------------
fa1 Designated Forwarding 200000 128.1
P2P(RSTP) N/A