Westermo MRI-128-F4G-PSE24 - Manual (Page 33)

29
NTP client: Set Time Setting Source to NTP client to enable the NTP client service.
NTP client will be automatically enabled if you change Time source to NTP Client.
The system will send requests to acquire current time from the configured NTP
server.
IEEE 1588: With the Precision Time Protocol IEEE 1588
is a high-precision time protocol for synchronization used in control system on a
network.
To enable IEEE 1588, select Enable in PTP Status and choose Auto, Master or
Slave Mode. After time synchronized, the system time will display the correct
time of the PTP server.
Time-zone: Select the time zone where the switch is located. Following table lists
the time zones for different locations for your reference. The default time zone is
GMT Greenwich Mean Time.
Switch(config)# clock timezone
01 (GMT-12:00) Eniwetok, Kwajalein
02 (GMT-11:00) Midway Island, Samoa
03 (GMT-10:00) Hawaii
04 (GMT-09:00) Alaska
05 (GMT-08:00) Pacific Time (US & Canada) , Tijuana
06 (GMT-07:00) Arizona
07 (GMT-07:00) Mountain Time (US & Canada)
08 (GMT-06:00) Central America
09 (GMT-06:00) Central Time (US & Canada)
10 (GMT-06:00) Mexico City
11 (GMT-06:00) Saskatchewan
12 (GMT-05:00) Bogota, Lima, Quito
13 (GMT-05:00) Eastern Time (US & Canada)
14 (GMT-05:00) Indiana (East)
15 (GMT-04:00) Atlantic Time (Canada)
16 (GMT-04:00) Caracas, La Paz
17 (GMT-04:00) Santiago
18 (GMT-03:00) NewFoundland
19 (GMT-03:00) Brasilia
20 (GMT-03:00) Buenos Aires, Georgetown
21 (GMT-03:00) Greenland
22 (GMT-02:00) Mid-Atlantic
23 (GMT-01:00) Azores