Westermo MRI-128-F4G-PSE24 - Manual (Page 52)

48
The description of the columns is as below:
Port: Port interface number.
Type: 100TX -> Fast Ethernet port. 1000TX -> Gigabit Ethernet port.
Link: Link status. Up -> Link UP. Down -> Link Down.
State: Enable -> State is enabled. Disable -> The port is disable/shutdown.
Speed/Duplex: Current working status of the port.
Flow Control: The state of the flow control.
SFP Vendor: Vendor name of the SFP transceiver you plugged.
Wavelength: The wave length of the SFP transceiver you plugged.
Distance: The distance of the SFP transceiver you plugged.
Eject: Eject the DDM SFP transceiver. You can eject one port or eject all by click
the icon “Eject All”.
Temperature: The temperatu re specific and current detected of DDM SFP
transceiver.
Tx Power (dBm): The specification and current transmit power of DDM SFP
transceiver.
Rx Power (dBm): The specification and current received power of DDM SFP
transceiver.
Note:
1. Most of the SFP transceivers provide vendor information which allows your
switch to read it. The User Interface can display vendor name, wave length and