Westermo MRI-128-F4G-PSE24 - Manual (Page 98)

94
Management VLAN ID: The switch supports management VLAN. The
management VLAN ID is the VLAN ID of the CPU interface so that only member
ports of the management VLAN can access the switch. The default management
VLAN ID is 1.
Static VLAN: You can assign a VLAN ID and VLAN Name for new VLAN here.
VLAN ID is used by the switch to identify different VLANs. Valid VLAN ID is
between 1 and 4094 andVLAN 1 is the default VLAN.
VLAN Name is a reference for network administrator to identify different VLANs.
The available character is 12 for you to input. If you don’t input VLAN name, the
system will automatically assign VLAN name for the VLAN. The rule is VLAN
(VLAN ID).
The steps to create a new VLAN: Type VLAN ID and NAME, and press Add to
create a new VLAN. Then you can see the new VLAN in the Static VLAN
Configuration table.
After created the VLAN, the status of the VLAN will remain in Unused until you
add ports to the VLAN.
Note: Before you change the management VLAN ID by Web and Telnet,
remember that the port attached by the administrator should be the member
port of the management VLAN; otherwise the administrator can’t access the
switch via the network.
Note: Currently The switch only support max 256 group VLAN.