Westermo MRI-128-F4G-PSE24 - Manual (Page 60)

56
Control –
Packet Type
broadcast :Broadcast packets
dlf :Destination Lookup Failure
multicast :Multicast packets
Storm
Contr–l -
Rate
Switch(config)# storm-control broadcast
<0-100000> Rate limit value 0~262143 packet/sec
Switch(config)# storm-control broadcast 10000
limit_rate = 10000 packets/sec
Set rate limit for Broadcast packets.
Switch(config)# storm-control multicast 10000
limit_rate = 10000 packets/sec
Set rate limit for Multicast packets.
Switch(config)# storm-control dlf 10000
limit_rate = 10000 packets/sec
Set rate limit for Destination Lookup Failure packets.
Port Trunking
LACP Switch(config)# lacp group 1 gi25-27
Group 1 based on LACP(802.3ad) is enabled!
Note: The interface list is fa1,fa3-5,gi25-27
Note: different speed port can’t be aggregated together.
Static
Trunk
Switch(config)# trunk group 2 fa6-7
Trunk group 2 enable ok!
Display –
LACP
etNet 5728G# show lacp internal
LACP group 1 internal information:
LACP Port Admin Oper Port
Port Priority Key Key State
----- ----------- -------- -------- -------
8 1 8 8 0x45
9 1 9 9 0x45
10 1 10 10 0x45
LACP group 2 is inactive
LACP group 3 is inactive
LACP group 4 is inactive
Display –
Trunk
Switch# show trunk group 1
FLAGS: I -> Individual P -> In channel
D -> Port Down