Westermo MRI-128-F4G-PSE24 - Manual (Page 13)

9
1000Base-TX: 4-pair UTP/STP Cat. 5e cable, EIA/TIA-568 100-ohm (100m)
IEEE 802.3af : 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)
IEEE 802.3at : 4-pair UTP/STP Cat. 5e / 6 cable, EIA/TIA-568 100-ohm (100m)
2.7 Wiring Combo Ports
The switch includes 4 RJ-45 Gigabit Ethernet portswhich supports 10Base-T,
100Base-TX and 1000Base-TX. The switch is also equipped with 4 gigabit SFP
ports combo which supports 1000Base-SX/LX and is according the standard MINI
GBIC SFP transceiver.
2.8 Wiring Fiber Ports
Small Form-factor Pluggable (SFP)
The SFP ports fulfill the SFP standard. To ensure the system reliability, it is
recommended to use the approved Gigabit SFP Transceiver. The web user
interface will show Unknown vendor type when choosing the SFP which is not
approved.
The way to connect the SFP transceiver is to Plug in SFP fiber transceiver first.
Cross-connect the transmit channel at each end to the receive channel at the
opposite end as illustrated in the figure below.
Note: This is a Class 1 Laser/LED product. Don't look into the Laser/LED Beam.
2.9 Data and Power Ports
The following table illustrates the Power ports and some features:
Models Power ports PoE/PoE+
Auto-sensing
and Auto
power off
MRI-128-F4G-PSE/24 Up to 24 ports Up to 24 ports Up to 24 ports