Westermo MRI-128-F4G-PSE24 - Manual (Page 62)

58
4.4 Power over Ethernet
Power over Ethernet is one of the key features of the switch. It is fully
IEEE802.3af-2003 compliant, and support IEEE802.3at, including 2-event and
LLDP classification.
The following commands are included in this section:
4.4.1 PoE Control
4.4.2 Emergency Power Management
4.4.3 PD Status Detection
4.4.4 PoE Scheduling
4.4.5 PoE Status
4.4.6 Command Line for PoE control
4.4.1 PoE Control
In WiMax systems, Wireless APs, and high-end PoE applications, there are various
types of PDs, for instance, IEEE 802.3af, IEEE 802.3at 2-event, IEEE 802.3at LLDP,
and non-standard type. To be compatible with different PDs, it is the world’s first
rackmount High Power PoE switch, designed with 4 powering modes, including
IEEE 802.3af mode, IEEE 802.3at 2-event mode, IEEE 802.3at LLDP classification
mode as well as forced powering mode to meet all of the PD types in the industry.
As a result, they can be flexibly used to deliver power for different PoE-enabled
devices in various applications.