Westermo MRI-128-F4G-PSE24 - Manual (Page 48)

44
DHCP Relay
Information
Switch# show ip dhcp relay
DHCP Relay Agent ON
----------------------------------------
IP helper-address : 192.168.2.200
Re-forwarding policy: Replace
Backup and Restore
Backup Startup
Configuration
file
Switch# copy startup-config tftp:
192.168.2.33/default.conf
Writing Configuration [OK]
Note 1: To backup the latest startup configuration
file, you should save current settings to flash first.
You can refer to 4.12 to see how to save settings to
the flash.
Note 2: 192.168.2.33 is the TFTP server’s IP and
default.conf is name of the configuration file. Your
environment may use different IP addresses or
different file name. Please type target TFTP server
IP or file name in this command.
Restore
Configuration
Switch# copy tftp: 192.168.2.33/default.conf
startup-config
Show Startup
Configuration
Switch# show startup-config
Show Running
Configuration
Switch# show running-config
Firmware Upgrade
Firmware
Upgrade
Switch# archive download-sw /overwrite tftp
192.168.2.33 MRI-128-F4G-PSE.bin
Firmware upgrading, don't turn off the switch!
Tftping file MRI-128-F4G-PSE.bin
Firmware upgrading
.................................................
...............................
.................................................
...............................
...........................