Westermo MRI-128-F4G-PSE24 - Manual (Page 35)

31
62 (GMT+09:00) Seoul
63 (GMT+09:00) Yakutsk
64 (GMT+09:30) Adelaide
65 (GMT+09:30) Darwin
66 (GMT+10:00) Brisbane
67 (GMT+10:00) Canberra, Melbourne, Sydney
68 (GMT+10:00) Guam, Port Moresby
69 (GMT+10:00) Hobart
70 (GMT+10:00) Vladivostok
71 (GMT+11:00) Magadan, Solomon Is., New Caledonia
72 (GMT+12:00) Aukland, Wellington
73 (GMT+12:00) Fiji, Kamchatka, Marshall Is.
74 (GMT+13:00) Nuku’alofa
Daylight Saving Time: Set when Enable Daylight Saving Time start and end,
during the Daylight Saving Time, the device’s time is one hour earlier than the
actual time.
Daylight Saving Start and Daylight Saving End: the time setting allows user to
selects the week that monthly basis, and sets the End and Start time individually.
Once you finish your configuration, click on Apply to apply your configuration.
4.2.5 Jumbo Frame
What is Jumbo Frame?
The typical Ethernet frame is range
from 64 to 1518 bytes. This is
sufficient for general usages. However,
when users want to transmit large
files, the files may be divided into
many small size packets. While the
transmitting speed becomes slow,
long size Jumbo frame can solve the
issue.
The switch allows you configure the size of the MTU, Maximum Transmission
Unit. The default value is 1,518bytes. The maximum Jumbo Frame size is 9,216
bytes.